A 38 µm soft non-permeable aluminum foil sealing film with strong medical-grade adhesive, AlumasSeal IITM sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 142.9 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 125.4 mm. Compared to other aluminum foils, AlumaSeal II has less tendency to roll back or itself when removing the backing paper and conforms well to the plate during application. Sterile product is packaged in 100 µm tamper-evident bags of 25.

• easily pierceable with single or multichannel pipettors and robotic probes
• heat & cold resistant, recommended for temperatures from -80 °C to +120 °C
• certified DNase-, RNase-, and nucleic-acid-free
• excellent barrier properties, virtually no sample evaporation or drying

A 38 µm thick aluminum foil sealing film for use with 96-well plates. Fits inside the rim of raised-rim plates. AlumaSeal 96TM sealing films have one partial-width end tab with no perforations. Pierceable. Available non-sterile only. Sealing film dimensions are 127 mm x 78 mm (including single 9.5 mm end tab).

• fits inside rim of raised-rim plate
• heat & cold resistant, recommended for temperatures from -40 °C to +150 °C
• certified DNase-, RNase-, and nucleic-acid-free
• replaces Corning®/Costar® #6570

** Completing application of AlumaSeal 96 sealing films by pressing with an accessory film-sealing paddle assures a secure uniform seal around all wells. The paddle fits within the rim of a raised-well plate.

A 38 µm thick aluminum foil sealing film for use with 384-well plates. AlumaSeal 384TM sealing films have one end tab with no perforations. Pierceable. Available non-sterile only. Sealing film dimensions are 137.3 mm x 82.5 mm (including single 13.5 mm end tab).

• heat & cold resistant, recommended for temperatures from -40 °C to +150 °C
• certified DNase-, RNase-, and nucleic-acid-free
• replaces Corning®/Costar® #6569

* Completing application of AlumaSeal 384 sealing films by pressing with the accessory plate roller assures a secure uniform seal around all wells.

* Completing application of AlumaSeal CS sealing films by pressing with the accessory plate roller assures a secure uniform seal around all wells.

AlumaSeal CSTM sealing films are specially formulated aluminum foil sealing films with an adhesive that withstands cold storage at temperatures to -80 °C. Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the sealing film as it lays on the plate to avoid curling. Dimensions are 82.6 by 132.6 mm, including the single 9.5 mm end tab. Recommended temperature range: -80 °C to +130 °C. AlumaSeal CS sealing films are certified DNase-, RNase-, and nucleic-acid-free. Sterile product is packaged in tamperevident zippered bags of 25, two bags per box.

• specially formulated for cold storage to -80 °C
• excellent barrier properties to retard evaporation
• easily pierceable with pipet tips or robotic probes for sample recovery

Copyright © 2005. Excel Scientific, Inc. "AlumaSeal" is a registered trademark, and "AlumaSeal II", "AlumaSeal 96", "AlumaSeal 384", and "AlumaSeal CS" are trademarks of Excel Scientific, Inc.

High-Resolution Image Downloads

For our distributors' use in catalogs, brochures, advertisements, and exhibits, high-resolution JPEG images of Excel Scientific sealing films are available for download from our Hi-Resolution Image Gallery: AlumaSeal II Sealing Films / AlumaSeal 96 Sealing Films / AlumaSeal 384 Sealing Films / AlumaSeal CS Sealing Films .